I’ve been pretty anxious to start putting together the surface supports for the board, but managed to convince myself to hold off until I figured out how I could clean up the exposed surfaces of the black acrylic.\u00a0 What I’ve always read is that the single best way to finish acrylic edges is by using flame polishing.\u00a0 Basically, move a torch quickly along the edge so the acrylic very briefly melts, then reforms a glossy, polished edge.<\/p>\n
Great theory.<\/p>\n
I went out to get a torch, which may be useful for other things later, and tested it out.\u00a0 Sure enough, it can melt the plastic, but there was one tiny problem.\u00a0 The acrylic I have is so thin the process caused warping. After reading up a bit more, someone mentioned that it wasn’t worth even trying on 4mm acrylic, and it turns out this stuff is closer to 1mm.\u00a0 So, back to the drawing board.\u00a0 Time to sand.<\/p>\n
(As a side note, I really would have needed to do the sanding anyway; the flame polishing won’t fix problems like saw marks, which I had quite a lot of.)<\/p>\n
After spending a while using various sand papers, sanding sponges, and files, dear wifey was about ready to climb the walls from the horrid screeching noise.\u00a0 This, combined with the fact that it was an awfully tedious, unproductive process, drove me to look for an alternate solution.\u00a0 The answer finally came in a series of posts discussing doing detail sanding work on wood carving, and mention was made of various rotary tool sanding options.<\/p>\n
Off to the hardware store this morning, to return with a new Dremel sanding kit.\u00a0 Had several different types of sanding, buffing, and polishing wheels.\u00a0 Unfortunately, they weren’t individually marked, so I had to make some guesses about which ones were which grits, but eventually I figured out a good order, and managed to get a pretty smooth finish on all the exposed edges.\u00a0 Unfortunately, my not-steadiest hand meant that in several places the wheels bit into the material too much, and left some parts rather more sanded down than intended, but it should be good enough.\u00a0 After all, the point of this is the nice lighted panels, not the black dividers between them.<\/p>\n
But I want those dividers to look nice enough to not draw attention, at least.<\/p>\n","protected":false},"excerpt":{"rendered":"
I’ve been pretty anxious to start putting together the surface supports for the board, but managed to convince myself to hold off until I figured out how I could clean up the exposed surfaces of the black acrylic.\u00a0 What I’ve always read is that the single best way to finish acrylic edges is by using […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-73","post","type-post","status-publish","format-standard","hentry","category-construction"],"_links":{"self":[{"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=\/wp\/v2\/posts\/73","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=73"}],"version-history":[{"count":2,"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=\/wp\/v2\/posts\/73\/revisions"}],"predecessor-version":[{"id":131,"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=\/wp\/v2\/posts\/73\/revisions\/131"}],"wp:attachment":[{"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=73"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=73"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/monopoly.furdaze.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=73"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}